The LUPUSEC-XT PIR network camera is a motion detector with an integrated mini snapshot camera. When the RAS (Infrared Reflection Absorption Spectroscopy) sensor detects a motion, images will be taken immediately and send to your alarm panel. These images can automatically be send to your email address. Of course, the PIR network camera will also trigger an alarm.
The PIR-network camera is especially suited for your entrance areas.
Even in darkness, the infrared-led of the camera guarantees that you will receive brilliant images. Thus, you are not only alarmed that movements took place, you are also able to check who or what was moving. The PIR network camera is battery powered and connects wirelessly to your XT alarm panel. Hence, you do not need to hassle with any wiring and you can install it at any wall or ceiling of your choice. Simply install the PIR network camera and connect it wirelessly with the alarm panel - it's as simple as that!
LUPUSEC - PIR network camera V3
120 x 72 x 52.1 mm (HxWxD) 4.72 x 2.83 x 2.05 inches (HxWxD)
0.13 kg (without batteries) 0.28 lbs
PIR passive infrared up to 10 meters
Tampering protection of the sensor displayed in the web interface
2,4 GHz, ZBS protocol
Max. 100mW (20dBm)
Approx. 30 to 100m (32 to 109 yards) depending on the local conditions
Screwing, 1.8m-2.0m (1.9 - 2.1 yards) height
3 x CR123 batteries
Average battery life
2 years (at detections a day)
Place of installation
Walls, corners Only indoors
Conforms to the following standards
CE, FCC, RoHs
640 x 480 pixels or 320x240 pixels
Compatible with XT alarm panel
XT1 Plus, XT2 Plus, XT3
PIR network camera V3
choosing a selection results in a full page refresh