Heat detector:
The LUPUSEC-XT heat detector is equipped with two sensors. One measures the temperature and the other measures how fast the temperature changes. If the temperature rises faster than 8.3°C per minute or rises above 57.3°C (135.14F), an alarm will be triggered. The heat detector is perfect for the kitchen, since, due to steam, normal smoke detectors are prone to trigger false alarms. The heat detector is battery powered and connects wirelessly to your XT alarm panel. Hence, you do not need to hassle with any wiring and you can install it at any wall or ceiling of your choice. Simply install the heat detector and connect it wirelessly with the alarm panel - it's as simple as that!
LUPUSEC - Heat detector
Technical data:
|
| Dimensions |
95 x 40mm (3.7 x 1.5 inch) (DxH) |
| Weight |
approx. 0.24 kg (0.52 pounds) (incl. batteries) |
| Detection method |
Temperature measurement |
| Sensortype |
Temperature sensor |
| Tampering protection |
- |
| Status checked by the alarm panel |
Yes |
| Status displayed in the alarm panel |
Yes |
| Radio frequency |
868,6625 MHz |
| Radio performance |
max. 25mW(14dBm) |
| Transmission range |
Approx. 30 to 100m (32 to 109 yards) depending on the local conditions |
| Modulation |
FM |
| Mounting options |
Screwing |
| Power supply |
3 x AA alkaline batteries 1.5V
|
| Average battery life |
3 years |
| Place of installation |
Wall, ceiling
Only indoors
|
| Conforms to the following standards |
CE, FCC, RoHs |
| Compatible with XT alarm panel |
XT1, XT1 Plus, XT2, XT2 Plus, XT3 |
Includes:
|
| Heat detector |
3 x AA alkaline batteries 1.5V |
| Screws and dowels |
Manual |
