XT2 Plus water sensor
The LUPUSEC – water sensor V2 alarms you dependably in case of flooding and water damage. You simply need to place the water sensor on the floor, e.g. close to your washing machine. Alternatively, you can connect an external, wired probe to the water sensor. Hence, only this external sensor needs to be placed on your floor and you can install the water sensor on a wall close by. Every contact with water is registered by the sensor, triggers the internal siren, and is transmitted to your alarm panel.
The water sensor is battery powered and connects wirelessly to your alarm panel. Hence, you do not need to hassle with any wiring and you can install it at any location on, or close to, the floor. Simply install the water detector and connect it wirelessly with the alarm panel - it's as simple as that!
LUPUSEC - Water sensor V2
Technical data:
|
| Dimensions |
95 x 29.5 x 82.5mm (3.74 x 1.16 x 3.24 inch) (LxWxH) |
| Weight |
approx. 0.12 kg (0.26 pounds) (incl. batteries) |
| Detection method |
Resistance measurement |
| Sensortype |
Resistance bridge |
| Tampering protection |
- |
| Status display |
- |
| Status checked in the alarm panel |
Yes |
| Status displayed in the alarm panel |
Yes |
| Radio frequency |
2,4 GHz |
| Radio performance |
max. 100mW(20dBm) |
| Transmission range |
Approx. 30 to 100m (32 to 109 yards) depending on the local conditions |
| Protocol |
ZigBee HA 1.2 Pro |
| Mounting options |
Screwing |
| Power supply |
1 x CR123A 3V lithium batteries
|
| Average battery life |
approx. 2.6 years (one activation per month) |
| Place of installation |
Wall, floor
Only indoors
|
| Conforms to the following standards |
CE, FCC, RoHs |
| Working environment |
-10°C to 45°C (14F to 113F) |
| Compatible with XT alarm panel |
XT1 Plus, XT2 Plus, XT3 |
Includes:
|
| Water sensor for XT2 Plus |
CR123A 3V lithium batteries |
| Screws and dowels |
Manual |
