LUPUS - sensor input (9 fold)
LUPUS - sensor input (9 fold) features nine dry contacts for up to 9 alarm circuits or individual sensors. If one of the connected sensors triggers an alarm, the sensor inputs forwards it to our XT alarm panel. Hence, the sensor input allows you to use your existing wired door contacts, wired motion detectors, your BUS system or other similar wired devices with our XT alarm panel. Of course, you can connect multiple sensors in a line to one of the inputs. The webUI of the XT alarm panel allows you to give each input an individual name (e.g. door contact(s), smoke detector(s)).
Please note: A separate mains adapter is required, see dropdown menu above.
LUPUS - Sensor input (9 times)
Technical data:
|
| Dimensions |
105 x 30 x 163 mm (LxWxH)
4.13 x 1.18 x 6.41 inches (LxWxH) |
| Detection method |
Potential-free contact |
| Resistance |
30 Ohm |
|
| Tampering protection |
Yes, against removal |
| Tampering protection displayed in the alarm panel |
Yes |
| Status checked and displayed by the alarm panel |
Yes |
| Radio frequency |
868,6625 MHz |
| Radio performance |
max. 25mW(14dBm) |
| Transmission range |
approx. 30 to 100m (32 to 109 yards) depending on the local conditions |
| Modulation |
FM |
| Mounting options |
Screwing, gluing |
| Power supply |
12V 1A mains adapter (not included) and a rechargeable emergency battery for approx. 72 hours |
| Place of installation |
any
only indoors
|
| Conforms to the following standards |
CE, FCC, RoHs, EN 14604 |
| Compatible with XT alarm panel |
XT1 Plus, XT2, XT2 Plus, XT3 |
Includes:
|
| Sensor input (9 fold) |
|
| Screws and dowels |
Manual |
|
|
