The combi alarm sensor for the LUPUESC smart home alarm panel
The LUPUSEC vibration sensor stops burglars immediately. The adjustable vibration sensor recognises the typical levering attempts when prying open a window or a door.
The sensor features two detection modes which three individual sensitivity levels. If the sensor is set to shock, a single push is enough to trigger an alarm. If the sensor is set to vibration, multiple pushes (e.g. the levering attempts of a burglar) are necessary to trigger an alarm.
Easy to install, dependably secured!
Simply insert the batteries and glue the sensor to your window or door and connect the sensor with our easy to use one-click technology to your alarm panel. Afterwards you can set the detection type and sensitivity. That’s all that is needed to set up your protection.
Once the sensor is added to your alarm panel, the vibration sensor detects any attempt to break into your home and sends a signal to the alarm panel. Thus, an alarm is triggered and you are immediately notified and can react accordingly (via push-notification, e-mail, SMS, or to your connected guard station).
LUPUSEC - Vibration Sensor
Ø 44.6mm x 16.3mm (Ø1.75 x 0.64 inches)
approx. 0.05 kg (0.11 lbs)(including batteries)
Tampering displayed in the alarm panel
Status monitored and displayed in the alarm panel
approx. 30 to 100 Meter (32 to 109 yards) depending on the local conditions
1 x CR2477 3V lithium batteries
Average battery life
approx. 2.6 years
Place of installation
Windows, window frames, doors Only indoors
Conforms to the following standards
CE, FCC, RoHs
-10°C to 45°C (14F to 113F)
Compatible with XT alarm panel
XT1 Plus, XT2, XT2 Plus, XT3
CR2477 3V lithium battery
choosing a selection results in a full page refresh