LUPUSEC - Temperature sensor with external probe.
LUPUSEC - Temperature sensor with external probe.
LUPUSEC - Temperature sensor with external probe.

Maple Leaf Facility Solutions Inc.

LUPUSEC - Temperature sensor with external probe.

Shipping calculated at checkout.

.LUPUSEC - Temperature sensor with external probe.

Our temperature sensors allow you to control your devices temperature controlled.

The LUPUS temperature sensor with external probe measures the temperature with an external probe that is located at the end of a 3 meter (3.2 yards) long cable and sends the current temperature every 10 minutes to the alarm panel. This allows you to check the temperature at the probes location from wherever you currently are. The temperature sensor is battery powered (approximate battery life 4.5 years) and is wirelessly connected to the XT smart home alarm panel. Hence, you do not need any wiring for the signal transmission or for the power supply.
The temperature sensor allows you to create temperature controlled automations e.g. for shading (with your shutters and blinds), for the temperature control of your radiators and floor heating, for your air-conditioning. These automations save you money and you will always have a pleasantly temperate home.

Technical data:

Dimensions 113.5 x 27 x 25.2mm (4.33 x 0.78 x 0.98 inch) (LxWxD), cable lentgh 3 meters
Weight approx. 0.2 kg (0.44 pouns) (incl. batteries)
Detection method Temperature measurement on external Probe
Sensortype Temperature sensor
Tampering protection yes
Status checked by the alarm panel Yes
Status displayed in the alarm panel Yes
Radio frequency 2,4 GHz (interference with other 2.4GHz devices is possible)
Radio performance max. 100mW(20dBm)
Transmission range approx. 30 to 100m (32 to 109 yards) depending on the local conditions
Modulation FM
Mounting options Screwing or glueing
Power supply CR123 3V lithium battery
Average battery life approx. 4.5 years
Place of installation Wall, ceiling
Conforms to the following standards CE, FCC, RoHs
Working environment (sensor) -10°C to +45°C
Temperature recognition -35°C to +65°C
Compatible with XT alarm panel XT1 Plus, XT2 Plus, XT3


Temperature sensor with external probe CR123 3V lithium batteries
Screws and dowels Manual